HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 587

Enables or disables ESD mode.

Synopsis

setesdmode [mode | -show]

Availability

admin

Description

Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in that

mode until the next execution of setEsdMode. The mode becomes active as soon as this command is

executed. It does not require a reboot to take effect.

ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact behavior

varies but most commonly consists of disabling the ports defined with diagEsdPorts when spinSilk

or other functional tests are run for ESD or EMI testing purposes.

Operands

This command has the following operands:

If no operand is specified, the current value displays.

Examples

To display the ESD mode: