HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

590 Fabric OS commands
Sets or displays diagnostic MFG mode.
Synopsis
setmfgmode [ mode | -show ]
Availability
admin
Description
This command enables MFG mode if mode is nonzero and disables the MFG mode if mode is 0. The
mode is saved in flash memory and stays in that mode until the next execution of setMfgMode. The mode
becomes active as soon as this command is executed; it does not require a reboot to take effect.
When enabled, MFG mode modifies the behavior of the diagnostic test methods and power-on self-test
(POST) scripts. The exact behavior of this mode varies but most commonly consists of enabling extra
manufacturing-specific tests and data patterns.
Options
The following are optional:
Examples
To display the current MFG mode:
See also
none
setMfgMode
mode
Specifies the MFG mode value. 0 disables MFG mode; any other value
enables MFG mode.
-show
If specified, or if no mode is given, the current MFG mode displays.
switch:admin> setmfgmode -show
Mfg Mode is 0 (Disabled)