HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 599

Disables XON/XOFF flow control on the console serial ports.

Synopsis

shellflowcontroldisable

Availability

admin

Description

Use this command to disable XON/XOFF flow control on the console serial ports. Flow control is disabled

by default.

Because this command changes the flow control on the console serial port, it must be executed from a

session that is logged in from the console serial port. This command cannot run from a telnet session.

This setting saves in the configuration database; therefore, persistent across reboots and power cycles.

On dual control processor (CP) systems, a reboot on the standby CP is required for this command to take

effect. No action is required on the active CP.

Operands

none

Examples

To disable flow control: