HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

606 Fabric OS commands
Displays slot status.
Synopsis
slotshow
Availability
all users
Description
Use this command to inventory and display the current status of each slot in the system. The fields and their
possible values are as follows:
Operands
none
slotShow
Slot Displays the physical slot number.
Blade Type Displays the blade type:
• SW BLADEThe blade is a switch.
• CP BLADE – The blade is a control processor.
• UNKNOWN – Blade not present or its type is not recognized
ID Displays the hardware ID of the blade type.
• 1 represents a Core Switch 2/64 CP BLADE
• 2 represents a Core Switch 2/64 SW BLADE
• 4 represents a SAN Director 2/128 SW BLADE
• 5 represents a SAN Director 2/128 CP BLADE
Status Displays the status of the blade:
• VACANT – The slot is empty.
• INSERTED, NOT POWERED ON – The blade is present in the slot but is turned
off.
• DIAG RUNNING POST1 –The blade is present, powered on, and running the
POST1 (power-on self-test 1).
• DIAG RUNNING POST2 –The blade is present, powered on, and running the
POST2 (power-on self-test 2).
• ENABLED –The blade is on and enabled.
• DISABLED –The blade is powered on but disabled.
• FAULTY –The blade is faulty because an error was detected.
• UNKNOWN –The blade is inserted but its state cannot be determined.