HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 609
Examples
To test the serial link of the following port path:
Diagnostic
When it detects failures, the test might report one or more of the following error messages:
DATA
ERRSTAT
INIT
STATS
TIMEOUT
See also
cmemRetentionTest
crossPortTest
itemList
portRegTest
spinSilk
--ports itemlist Specifies a list of blade ports to test. By default all the blade ports in the
specified slot (--slot) is used.
Refer to itemList for further details.
switch:admin> sltest -ports 0/5-0/31 -speed 4 -lb_mode 1 passcnt 1
Running Port sltest ....
passed.