HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 613
systemGroup Configuration Parameters
Options
This command supports following options:
Operands
This command supports following operands:
sysDescr System description. The default value is set as Fibre Channel Switch.
sysLocation Location of the system (switch). The default value is set as End User
Premise.
sysContact Contact information for this system (switch). The default value is set as Field
Support. Refer to the definition of sysDescr, sysLocation and sysContact in
system group of MIB-II.
authTraps When enabled, the authentication trap (authenticationFailure) is transmitted to
a configured trap recipient in the event that the agent received a protocol
message that is not properly authenticated. In the context of SNMPv1 and
SNMPv2c, this means that a request contains a community string that is not
known to the agent. The default value for this parameter is 0 (disabled).
--show Displays the SNMP agent configuration data of specified category.
--set Sets the SNMP agent configuration data of specified category. This option
displays the current settings and then prompts the user to change the values for
each parameter.
--default Sets to the default values the SNMP agent configuration data of specified item.
Generally, these default values may be available in configuration data base. It
sets to factory default values, if SNMP agent configuration parameters are not
available in configuration database.
snmpv1 It selects SNMPv1 related configuration parameters. SNMPv1 parameters
include community strings, trap recipients's ip address and trap severity level
associated with each trap recipients's ip address.
snmpv3 It selects SNMPv3 related configuration parameters. SNMPv3 parameters
include user name, authentication protocol/password, privacy
protocol/password, SNMPv3 trap recipients's ip address, associated user index
and trap severity level.
accessControl It selects access control related parameters. accessControl parameters include
Access host subnet area and access permission (read-write).
mibCapability It selects configuration parameters related to SNMP agent's MIBs and TRAP
capability parameters. mibCapability parameters include mibs and traps
supported by SNMP agent.
systemGroup It selects configuration parameters related to system group. systemGroup
parameters include sysDescr, sysLocation, sysContact and authentication failure
trap.