HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 617
To change the systemGroup configuration to default:
See also
agtCfgDefault
agtCfgSet
agtCfgShow
snmpMibCapSet
snmpMibCapShow
SW_v5_x.mib, Switch Management Information & Switch Enterprise Specific Trap
RFC1157, A Simple Network Management Protocol (SNMPv1)
RFC1213, Management information Base for Network Management of TCP/IP-based internets: MIB-II
RFC2574, User-based Security Model (USM) for version 3 of the Simple Network Management Protocol
(SNMPv3)
switch:admin> snmpconfig --default systemGroup
*****
This command will reset the agent's system group configuration back
to factory default
*****
sysDescr = Fibre Channel Switch
sysLocation = End User Premise
sysContact = Field Support
authTraps = 0 (OFF)
*****
Are you sure? (yes, y, no, n): [no] y