HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

618 Fabric OS commands
Modifies options for configuring SNMP MIB trap capability.
Synopsis
snmpmibcapset
Availability
admin
Description
This command enables a user to turn on or off certain MIBs and traps. This command also enables a user
to turn on or off group information and SSN in SW trap messages. It first displays current settings and then
prompts the user to change the values for each parameter.
Operands
none
Examples
To view or modify the options for configuring SNMP MIB traps:
See also
agtCfgDefault
agtCfgSet
agtCfgShow
snmpMibCapSet
FA-MIB Specifying yes means the user can access FA-MIB variables with an SNMP
manager. The default value is yes.
HA-MIB Specifying yes means the user can access HA-MIB variables with an SNMP
manager. The default value is yes.
SW-TRAP Specifying yes means the SNMP management application can receive SW-TRAPS
from the switch. The default value is yes.
FA-TRAP Specifying yes means the SNMP management application can receive FA-TRAPS
from the switch. The default value is yes.
SW-EXTTRAP Specifying yes means the SNMP management application can receive
SW-EXTTRAPS from the switch. The default value is yes.
HA-TRAP Specifying yes means the SNMP management application can receive HA-TRAPS
from the switch. The default value is yes.
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB HA-MIB SW-TRAP FA-TRAP HA-TRAP
FA-MIB (yes, y, no, n): [yes]
HA-MIB (yes, y, no, n): [yes]
SW-TRAP (yes, y, no, n): [yes]
FA-TRAP (yes, y, no, n): [yes]
SW-EXTTRAP (yes, y, no, n): [no] y
HA-TRAP (yes, y, no, n): [yes]