HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 625
Examples
To measure line-speed jitter:
For -lb_mode set to 0,1, the following speed modes are available to test the
speed negotiation.
3
4
5
6
Set all even ports' speed for autonegotiate. Set all odd ports' speed
for 1 Gb/s.
Set all even ports' speed for autonegotiate. Set all odd ports' speed
for 2Gb/s.
Set all odd ports' speed for autonegotiate. Set all even ports' speed
for 1 Gb/s.
Set all odd ports' speed for autonegotiate. Set all even ports' speed
for 2 Gb/s.
For -lb_mode set to 2,3, the following speed modes are available to test FIFO
underrun.
3,5
4,6
Set all even ports' speed for 2 Gb/s. Set all odd ports' speed for 1
Gb/s.
Set all even ports' speed for 1 Gb/s. Set all odd ports' speed for 2
Gb/s.
-ports
itemlist
Specifies a list of user ports to test. By default, all the user ports in the specified
slot (--slot) will be used. Refer to itemList for further details.
switch:admin> spinjitter -ports 1/0 - 1/2
Running SpinJitter .............
One moment please ...Ports Segmented (0)
switchName: SW12000A
switchType: 10.1
switchState: Offline
switchRole: Disabled
switchDomain: 1 (unconfirmed)
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
switchBeacon: OFF
blade1: Beacon: OFF
blade2: Beacon: OFF
blade3: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port Gbic Speed State
=====================================
0 1 0 id 2G Online Testing ......
1 1 1 id 2G Online Testing ......
2 1 2 id 2G Online Testing ......
(output truncated)