HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 631
Examples
To run spinSilk on a switch:
Diagnostics
Following are the possible error messages if failures are detected:
DATA
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
ERR_STAT_BADOS
-ports
itemlist
Specify a list of user ports to test. By default, all of the user ports in
the current switch are tested. This option might be used to restrict
testing to the specified ports.
switch:admin> spinsilk -ports 1/0 - 1/2
Running Spin Silk .............
One moment please ...Ports Segmented (0)
switchName: switch
switchType: 10.1
switchState: Offline
switchRole: Disabled
switchDomain: 1 (unconfirmed)
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
switchBeacon: OFF
blade1: Beacon: OFF
blade2: Beacon: OFF
blade3: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port Gbic Speed State
=====================================
0 1 0 id 2G Online Testing ......
1 1 1 id 2G Online Testing ......
2 1 2 id 2G Online Testing ......
(output truncated)