HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 641
Saves support information for RASLOG, TRACE, and supportShow.
Synopsis
supportsave [-n] [-c] [-u user_name -p password] -h host_ip -d remote_dir
Availability
admin
Description
Use this command to save RASLOG, TRACE, and supportShow (active CP only) information for the local
CP to a remote FTP location. If no operands are specified, this command enters interactive mode. The
following output files are generated:
Operands
The operands are as follows:
supportSave
RASLOG switchname-slot-YYYYMMDDHHMM-errDumpAll.ss
TRACE switchname-slot-YYYYMMDDHHMM-tracedump.dmp
supportShow switchname-slot-YYYYMMDDHHMM-supportShow (saved in the specified
remote directory)
-n Does not prompt the user for confirmation. This operand is optional; if
omitted, the user is prompted for confirmation.
-c Uses the FTP parameters saved by the command supportFtp. This operand
is optional; if omitted, specify the FTP parameters through command line
options or interactively. To display the current FTP parameters, run
supportFtp (on a dual CP system, run supportFtp on the active CP).
NOTE: The -c operand is mutually exclusive with -u, -p, -h, and -d.
-u user_name Specifies the user name for the FTP server. This operand is optional; if
omitted, anonymous FTP is used.
-p password Specifies the password for the FTP server. This operand is optional; if omitted,
anonymous FTP is used.
-h host_ip Specifies the IP address for the FTP server.
-d remote_dir Specifies the remote directory for the FTP server.