HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

642 Fabric OS commands
Examples
To save RASLOG, TRACE, and supportShow information to a FTP server in non-interactive mode:
To save RASLOG, TRACE, and supportShow information to a FTP server in interactive mode:
See also
supportFtp
supportShow
traceDump
traceFtp
traceTrig
switch:admin> supportsave -n -u admin -p pass -h 192.168.1.1 -d tmp
Saving support information for module RASLOG...
...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 1.66 kB
566.47 B/s
Saving support information for module TRACE...
...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB
848.00 kB/s
Saving support information for module SUPPORTSHOW...
...rtSave_files/switch-S5-200405200014-supportShow.ss: 1.11 MB
346.39 kB/s
switch:admin> supportsave
This command will collect RASLOG, TRACE, and supportShow (active CP
only) information for the local CP and then transfer them to a FTP
server. The operation can take several minutes. OK to proceed? (yes, y,
no, n): [no] y
Host IP:
192.168.1.1
User Name: admin
Password:
Remote Directory: tmp
Saving support information for module RASLOG...
...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 1.66 kB
566.47 B/s
Saving support information for module TRACE...
...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB
848.00 kB/s
Saving support information for module SUPPORTSHOW...
...rtSave_files/switch-S5-200405200014-supportShow.ss: 1.11 MB
346.39 kB/s