HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 643
Prints switch information for debugging purposes.
Synopsis
supportshow [[slotnumber/]portnumber1-portnumber2] [lines]
Availability
all users
Description
Use this command to display support information from groups of preselected Fabric OS and Linux
commands. You can specify the range of ports for which this information displays. These commands are
organized by groups, but note that the order of the groups listed next is not the same as executed by the
command.
Refer to Chapter 7, for more information.
The commands can be arranged in groups, as follows:
• OS (ENABLED by default; Linux commands are not documented in this manual)
• mii-tool
• du
• ps
• rpm
• dmesg
• fstab
• mtab
• various proc entries
•find core files
• exception (ENABLED by default)
• errDump
• pdShow
• port (ENABLED by default)
• diagShow (per-slot)
• portShow (per-slot)
• portLoginShow (per-slot)
• portRegTest (per-slot)
• portRouteShow (per-slot)
• fabric (ENABLED by default)
• fabricShow
• islShow
• trunkShow
• topologyShow
• LSDbShow
• ess show
• fabStateShow
• fabSwitchShow
supportShow