HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)
Fabric OS 5.0.0 command reference guide 645
• portFlagsShow
• portCfgShow
• portErrShow
• fwSamShow
• agtCfgShow
• slotShow (product-dependent)
• emtraceshow
• systraceshow -d
• fwAlarmsFilterShow
• chassisShow
• timeout
• historyShow
• portSwapShow
• configShow
• extend (DISABLED by default)
•buffers (per-port)
• credits (per-port)
• data (per-port)
• phantom (per-port)
•properties (per-port)
• statistics (per-port)
• filter (DISABLED by default; this group has lengthy output)
• filterportshow (per-port)
• perfmon (DISABLED by default)
• ps_dump (per-port; this group has lengthy output)
Operands
This command has the following operands:
slotnumber/portnumber1
-portnumber2
Specify the range of ports to display. If the
slotnumber/portnumber parameter is omitted, all ports
in the switch display in the per-port outputs. The
slotnumber must be provided when specifying a range of
ports on multi-bladed products.
lines Specifies the number of lines of portLogDump output to
display. If this parameter used, the
slotnumber/portnumber parameter is required.