HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

664 Fabric OS commands
Sets the policy parameters that determine overall switch status.
Synopsis
switchstatuspolicyset
Availability
admin
Description
Use this command to set policy parameters for calculating the overall status of the switch enclosure. The
policy parameter values determine how many failed or faulty units of each contributor are allowed before
triggering a status change in the switch from HEALTHY to MARGINAL or DOWN. The status of the switch
can be found by issuing the switchStatusShow command.
The command displays the current parameters in a three-column table format, shown in Table 19. The
command then prompts the user to change the values for each policy parameter. The default values for
the policy parameters are in shown Table 19.
Any single contributor can force the overall status of the switch to MARGINAL or DOWN. For example,
assuming that the switch contributor values are set to the default values, if there is one faulty port in a
switch, then this contributor would set the overall switch status to MARGINAL. If two ports were faulty, then
this contributor would set the overall switch status to DOWN.
Operands
none
switchStatusPolicySet
Table 19 Default contributor, values, and status
Contributor DOWN default MARGINAL default
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0