HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 665
Examples
To change the switch policies:
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the
** prompt is (0..0), the policy parameter is NOT applicable
** to the switch. Simply hit the Return key.
Out of range Flash contributing to
MARGINAL status: (0..1) [1]
MarginalPorts contributing to
DOWN status: (0..64) [2]
MarginalPorts contributing to
MARGINAL status: (0..64) [1]
(output truncated)
(continued on next page)