HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 667
Displays the policy parameters that determine overall switch status.
Synopsis
switchstatuspolicyshow
Availability
all users
Description
Use this command to view the current policy parameters set for the switch. These policy parameters
determine the number of failed or nonoperational units allowed for each contributor before triggering a
status change in the switch.
The command displays the current parameters in a three-column table format, shown in Table 20. The
default values for the policy parameters are in shown in Table 20.
The policy parameters determine the number of failed or nonoperational units for each contributor that
trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to 3, and
three ports fail in the switch, then the status of the switch changes to DOWN.
Operands
none
switchStatusPolicyShow
Table 20 Default contributor, values, and status
Contributor DOWN default MARGINAL default
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0