HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

684 Fabric OS commands
Displays, enables, or disables the trace auto-FTP, or retrieves the trace dump file.
Synopsis
traceftp [-S]
traceftp -e
traceftp -d
traceftp -n [-s slot] [-h hostip] [-u username] [-p password]
[-d remotedirectory] [-f remotefile]
Availability
admin
Description
Use this command to display, enable, or disable trace auto-FTP or to retrieve a trace dump file from the
switch to the FTP site immediately.
NOTE: If there is no parameter specified, this command defaults to traceftp -S.
Default remote file name format for traceftp -n is switchname-S#-YYYYMMDDHHMMSS.dmp. The #
is the slot number (0 if it is on nonbladed system), and YYYYMMDDHHMMSS is trace dump time
(year-month-day-hour-minute-second).
Operands
This command has the following mutually exclusive operands:
traceFtp
-S Displays trace auto-FTP feature.
-e Enables trace auto-FTP feature.
-d Disables trace auto-FTP feature.
-n Retrieves a trace dump file from the switch immediately. The -n option has the following
optional operands:
-s slot
-h hostip
-u username
-p password
-d remotedirectory
-f remotefile
Specifies the slot number from which a trace dump is
generated. If this is not supplied, the trace dump is generated
from the local slot.
Specifies FTP host IP address. It must be IP address.
Specifies FTP user name.
Specifies FTP user password. If the user name is anonymous,
the password is not needed.
Specifies the remote directory which to store a trace dump file.
Specifies the remote file which to store a trace dump file.