HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

686 Fabric OS commands
Sets, removes, or displays trace triggers.
Synopsis
tracetrig [-S] [-s slot]
tracetrig -a [-s slot] msgid
tracetrig -r [-s slot] msgid
tracetrig -R [-s slot]
Availability
admin
Description
Use this command to set, remove, or display trace triggers for the specified slot on the switch.
NOTE: If there is no parameter specified, this command defaults to tracetrig -S.
Operands
This command has the following mutually exclusive operands:
-This command has the following optional operand:
The -a and -r options also have the following required operand:
Examples
To set a trace trigger:
To remove a trace trigger:
traceTrig
-S Displays trace triggers for the specified slot.
-a Sets a trace trigger for the specified slot.
-r Removes a trace trigger from the specified slot.
-R Removes all trace triggers from the specified slot.
-s slot Specifies the slot number from which a trace dump is generated. If this
is not supplied, the trace dump is generated from the local slot.
msgid Specifies the trigger number, using the RASLog message ID. This
operand is required.
switch:admin> tracetrig -a NS-1001
trace trigger[NS-1001] is added
switch:admin> tracetrig -r NS-1001
trace trigger[NS-1001] is removed