HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 689
Enables or disables configuring of track-changes feature.
Synopsis
trackchangesset [mode][, snmptrapmode]
Availability
admin
Description
This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be enabled.
Trackable changes are:
• Successful login
• Unsuccessful login
• Logout
• Config file change from task
• Track changes on
• Track changes off
The output from the track-changes feature is dumped to the error log for the switch. Use the errDump
command or errShow command to view the error log.
Operands
This command has the following operands:
Examples
To enable the track-changes feature:
trackChangesSet
mode Specify 1 to enable the track-changes feature or specify 0 to
disable the feature. The default (if no operand is specified) is to
disable the track-changes feature. This operand is optional.
snmptrapmode Specify 1 to enable errors to be sent to the SNMP-TRAP in
addition to the errlog or specify 0 to disable the SNMP-TRAP
messages. The default (if no operand is specified) is to disable
SNMP-TRAP messages. This operand is optional.
switch:admin> trackchangesset 1, 1
Committing configuration...done.
switch:admin> trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: YES