HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 721
Deletes a zone.
Synopsis
zonedelete “zonename“
Availability
admin
NOTE: This command requires an HP Advanced Zoning license.
Description
Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch reboots, it
must be saved to flash memory using the cfgSave command. For the change to become effective, an
appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following operand:
Examples
To delete the zone Blue_zone:
See also
zoneAdd
zoneCreate
zoneRemove
zoneShow
zoneDelete
zonename Name of the zone to be deleted, in quotation marks. This operand is
required.
switch:admin> zonedelete "Blue_zone"