HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

732 Fabric OS commands
Displays zone information.
Synopsis
zoneshow [“pattern“][, mode]
Availability
all users
NOTE: This command requires an HP Advanced Zoning license.
Description
Use this command to display zone configuration information.
If no parameters are specified, all zone configuration information (both defined and enabled) is
displayed. Refer to cfgShow for a description of this display.
If a parameter is specified, it is used as a pattern to match zone configuration names, and those that
match in the defined configuration are displayed.
NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operand is optional:
Examples
To display all zones beginning with the letters A through C:
zoneShow
pattern A POSIX-style regular expression used to match zone configuration names. The
pattern must be enclosed in quotation marks. Patterns can contain:
A question mark (?), which matches any single character.
An asterisk (*), which matches any string of characters.
Ranges, which match any character within the range: for example, [0-9] or [a-f].
mode Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction), or specify 1 to display the contents of the flash memory. The
default value is 0. This operand is optional.
switch:admin> zoneshow "[A-C]*"
zone: Blue_zone 1,1; array1; 1,2; array2