HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 739
Secure Fabric OS commands
The following commands are available with the purchase of a HP Security license key. For more detailed
information about security, refer to the HP StorageWorks Secure Fabric OS 4.x user guide.)
Table 27 HP Secure Fabric OS commands
Command Description
secFabricShow Displays security related fabric information.
secFCSFailover Enables a backup FCS switch to take over as primary FCS switch.
secHelp Display information about security telnet commands.
Enable security mode.
secModeDisable Disable security mode.
secModeShow Display if security mode is enabled or disabled.
secNonFcsPasswd Set the admin password for non-FCS switches.
secPolicyAbort Aborts all changes to the defined database that have not been
saved.
secPolicyActivate Apply defined policy set to all switches in the fabric.
secPolicyAdd Add members to an existing policy.
secPolicyCreate Create a new policy.
secPolicyDelete Delete an existing policy.
secPolicyDump Display all members of existing policies.
secPolicyFCSMove Move a member in the FCS policy.
secPolicyRemove Remove members from an existing policy.
secPolicySave Save a defined security policy to flash memory on all switches in
the fabric.
secPolicyShow Display an existing security policy.
secStatsReset Reset security statistic for a policy or all policies to 0.
secStatsShow Display security statistic for a policy or for all policies.
secTempPasswdReset Reset a password on a remote switch.
secTempPasswdSet Set a temporary password on a remote switch.
secTransAbort Abort current security transaction.
secVersionReset Reset the version stamp to 0.