HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 741
4 Exclusive primary FCS commands
This chapter summarizes the commands that are available on the primary FCS only when the security
feature is installed and enabled.
Commands exclusive to the primary FCS
The following commands are available on the primary FCS only when security is installed and enabled.
Table 28 Commands exclusive to the primary FCS
Command Notes
agtCfgSet Can be run on all switches, but it needs to be run on the primary FCS to modify
community strings
agtCfgDefault Must be run from the primary FCS switch.
aliAdd Must be run from the primary FCS switch.
aliCreate Must be run from the primary FCS switch.
aliDelete Must be run from the primary FCS switch.
aliRemove Must be run from the primary FCS switch.
aliShow Must be run from the primary FCS switch.
cfgAdd Must be run from the primary FCS switch.
cfgClear Must be run from the primary FCS switch.
cfgCreate Must be run from the primary FCS switch.
cfgDelete Must be run from the primary FCS switch.
cfgDisable Must be run from the primary FCS switch.
cfgEnable Must be run from the primary FCS switch.
cfgRemove Must be run from the primary FCS switch.
cfgSave Must be run from the primary FCS switch.
cfgShow Can be run on all FCS switches.
cfgTransAbort Must be run from the primary FCS switch.
cfgTransShow Must be run from the primary FCS switch.
date This command can be run on all switches to view the current date. You can only
modify the date from the primary FCS switch.
faZoneAdd Must be run from the primary FCS switch.