HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 749
6 Control processor commands
This chapter lists the commands available when logged in to the active CP and standby CP in a Core
Switch 2/64 or HP StorageWorks SAN Switch Director 2/128.
Commands supported on the active CP
When logged in to the active CP on a Core Switch 2/64, you must specify the logical switch number to
which you are connecting. This guarantees that any commands you execute are run on the desired logical
switch. Once you have selected a logical switch, the full set of commands for your user level are available.
Commands supported on the standby CP
The following commands are supported when logged into the standby CP.
Table 30 Commands supported on the standby CP
Command Description
date Print/set the system date and time.
errClear Clear error log.
errDump Print error log (no page breaks).
errNvLogSizeSet Resize nonvolatile (persistent) error log.
errNvLogSizeSize Display persistent error log configuration.
errSaveLvlSet Set error save level.
errSaveLvlShow Get error save level.
errShow Print error log.
fastBoot Reboot this switch, bypassing POST.
firmwareCommit Commit firmware to stable storage.
firmwareDownload Download firmware into switch.
firmwareDownloadStatus Display the progress and status of firmwaredownload.
firmwareRestore Restore the old firmware in the switch.
firmwareShow Display firmware versions in the switch.
h Print shell history.
haDump Dump HA debug data.
haShow Print High Availability status.