HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

84 Fabric OS commands
Deletes a zone configuration.
Synopsis
cfgdelete “cfgName“
Availability
admin
NOTE: This command requires an HP Advanced Zoning license.
Description
Use this command to delete a zone configuration.
This command changes the defined configuration. For the change to be preserved across switch reboots, it
must be saved to flash memory using the cfgSave command. For the change to become in effect, an
appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following operand:
Examples
To delete a zone configuration:
See also
cfgAdd
cfgClear
cfgCreate
cfgDisable
cfgEnable
cfgRemove
cfgSave
cfgShow
cfgDelete
cfgName Specify a name for the zone configuration to be deleted, in
quotation marks. This operand is required.
switch:admin> cfgdelete “USA_cfg”