HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 85

Disables a zone configuration.

Synopsis

cfgdisable

Availability

admin

NOTE: This command requires an HP Advanced Zoning license.

Description

Use this command to disable the current zone configuration. The fabric returns to nonzoning mode, in

which all devices see each other.

This command ends and commits the current zoning transaction buffer to both volatile and flash memory.

If a transaction is open on a different switch in the fabric when this command is run, the transaction on the

other switch is automatically aborted. A message is displayed on the other switches to indicate the

aborting of the transaction.

NOTE: When security is enabled, this command can be issued only from the primary FCS switch.

Operands

none

Examples

To disable the current zone configuration: