HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

Fabric OS 5.0.0 command reference guide 87
Removes a member from a zone configuration.
Synopsis
cfgremove “cfgName“, “member [; member ...]“
Availability
admin
NOTE: This command requires an HP Advanced Zoning license.
Description
Use this command to remove one or more members from an existing zone configuration.
If all members are removed, the zone configuration is deleted.
This command changes the defined configuration. For the change to be preserved across switch reboots, it
must be saved to flash memory using the cfgSave command. For the change to become in effect, an
appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operands are required:
Examples
To remove a zone from a configuration:
See also
cfgAdd
cfgClear
cfgCreate
cfgRemove
cfgName Specify a name for the zone configuration, in quotation marks.
member Specify a zone member or list of zone members to be added to
the configuration, in quotation marks and separated by
semicolons. Members can be specified in one or more of the
following ways:
• Zone names
• QuickLoop names
• FA (Fabric Assist) zone names
switch:admin> cfgremove "Test_cfg", "redzone"