HP StorageWorks Fabric OS 5.0.0 Command Reference Guide (AA-RW1MA-TE, May 2005)

98 Fabric OS commands
Operands
The operands are as follows:
Examples
-f If specified, forces configuration changes without asking for confirmation or
requesting a configuration upload.
option Specify the new configuration option to apply to the chassis. This operand is
optional; if omitted, this command displays the current configuration option,
and a list of all valid options. Values include:
1
2
3
4
One 128-port switch (blade ID 4 on slots 1 through 4 and 7
through 10)
Two 64-port switches (blade ID 4 on slots 1 through 4 and 7
through 10)
Two 64-port switches (blade ID 4 on slots 1 through 4, ID 2 on slots 7
through 10)
Two 64-port switches (blade ID 2 on slots 1 through 4, ID 4 on slots 7
through 10)
switch:admin> chassisconfig 2
This will reboot all the CPs and the configuration data will be restored
to
factory defaults if moved between single and multiple domains. This
includes,
but are not limited to, port swap, routing, zoning, performance
monitoring, port
config, fabric watch, management server, time server, snmp, security,
fabric and
other FabOs configuration parameters.
Traffic will be disrupted and both the CPs comes up and will vary in the
number
of switches and the Blade IDs they recognize based on the configuration
selected. Some configuration values are applicable to both single-domain
and
multiple-domain switches, and are therefore not modified. (Examples:
licenses,
IP addresses, host and switch names, SSL certificates, PKI
certificates.) Please
read the man page for further information.
(continued on next page)