HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

118 Messages
Probable cause
The read system call to the FSS device failed.
Recommended action
Run supportFtp as needed to set up automatic FTP transfers and then run the supportSave command
and contact your switch service provider.
Severity
WARNING
FSS-1006
Message
Probable cause
Data is not available on the FSS device.
Recommended action
Run supportFtp as needed to set up automatic FTP transfers and then run the supportSave command
and contact your switch service provider.
Severity
WARNING
Fabric OS state synchronization management
module error messages
FSSM-1002
Message
Probable cause
The high-availability (HA) state for the active CP is in synchronization with the HA state of the standby CP.
If the standby CP is healthy, a failover is nondisruptive. For more information on the haFailover
command, refer to the HP StorageWorks Fabric OS 4.x command reference guide.
Recommended action
No action is required.
timestamp, [FSS-1006], sequence-number,, WARNING, system-name, No message
available
timestamp, [FSSM-1002], sequence-number,, INFO, system-name, HA State is
in sync