HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

154 Messages
FW-1174
Message
Probable cause
The number of protocol errors that the port experiences rose above the high boundary. Occasional
protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended action
Check both ends of your connection and verify that your cable and SFP are not faulty.
Severity
WARNING
FW-1175
Message
Probable cause
The number of protocol errors that the port experiences changed from a value outside the acceptable
range to a value within the acceptable range. Occasional protocol errors occur due to software glitches.
Persistent protocol errors occur due to hardware problems.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
FW-1176
Message
timestamp, [FW-1174], sequence-number,, WARNING, system-name, port-name,
label, is above high boundary(High=high-value, Low=low-value). Current
value is value unit.
timestamp, [FW-1175], sequence-number,, INFO, system-name, port-name,
label, is between high and low boundaries(High=high-value, Low=low-value).
Current value is value unit.
timestamp, [FW-1176], sequence-number,, INFO, system-name, port-name,
label, value has changed(High=high-value, Low=low-value). Current value is
value unit.