HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 171
FW-1251
Message
Probable cause
The number of EE word frames that the switch transmits changed from a value outside the acceptable
range to a value within the acceptable range. Transmit-performance messages appear due to the number
of word frames that travel from the configured S_ID to the D_ID pair.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
FW-1272
Message
Probable cause
The number of frame types or commands that the port receives changed. The port received SCSI Read,
SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
FW-1273
Message
timestamp, [FW-1251], sequence-number,, INFO, system-name, label, is
between high and low boundaries(High=high-value, Low=low-value). Current
value is value unit.
timestamp, [FW-1272], sequence-number,, INFO, system-name, label, value
has changed(High=high-value, Low=low-value). Current value is value unit.
timestamp, [FW-1273], sequence-number,, INFO, system-name, label, is below
low boundary(High=high-value, Low=low-value). Current value is value unit.