HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

172 Messages
Probable cause
The number of frame types or commands that the port receives fell below the low boundary. The port
received SCSI Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
FW-1274
Message
Probable cause
The number of frame types or commands that the port receives rose above the high boundary. The port
received SCSI Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
FW-1275
Message
Probable cause
The number of frame types or commands that the port receives changed from a value outside the
acceptable range to a value within the acceptable range. The port received SCSI Read, SCSI Write, SCSI
Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
timestamp, [FW-1274], sequence-number,, INFO, system-name, label, is above
high boundary(High=Filter-counter, Low=Low-value). Current value is value
unit.
timestamp, [FW-1275], sequence-number,, INFO, system-name, label, is
between high and low boundaries(High=high-value, Low=low-value). Current
value is value unit.