HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

190 Messages
Severity
INFO
FW-1336
Message
Probable cause
The number of DCC violations has changed.
DCC violations indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for
the specification of rules for binding device ports (typically HBA ports) to specific switch ports. DCC
policies ensure that whenever a device performs a fabric login (FLOGI) request, the WWN specified in
the FLOGI is validated to be connected to the authorized port. Enforcement for private loop devices not
performing FLOGI is done through the Name Server.
Recommended action
Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses
to security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
INFO
FW-1337
Message
Probable cause
The number of DCC violations fell below the low boundary.
DCC violations indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for
the specification of rules for binding device ports (typically HBA ports) to specific switch ports. DCC
policies ensure that whenever a device performs a fabric login (FLOGI) request, the WWN specified in
the FLOGI is validated to be connected to the authorized port. Enforcement for private loop devices not
performing FLOGI is done through the Name Server.
Recommended action
No action is required.
Severity
INFO
timestamp, [FW-1336], sequence-number,, INFO, system-name, label, value
has changed(High=high-value, Low=low-value). Current value is value unit.
timestamp, [FW-1337], sequence-number,, INFO, system-name, label, is below
low boundary(HHigh=high-value, Low=low-value). Current value is value
unit.