HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 193
Recommended action
Run the errShow command to determine the IP location of the login attempt. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity
WARNING
FW-1343
Message
Probable cause
The number of login violations changed from a value outside the acceptable range to a value within the
acceptable range. Login violations indicate that a login failure was detected.
Recommended action
No action is required.
Severity
INFO
FW-1344
Message
Probable cause
The number of invalid timestamps changed.
Invalid-timestamp violations indicate that a packet with an invalid timestamp was received from the
primary fabric configuration server (FCS).
When the primary FCS downloads a new configuration to other switches in the fabric, the packet is
tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the
difference is too great, the receiving switch rejects the packet. This counter keeps track of packets
rejected due to invalid timestamps.
Recommended action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
timestamp, [FW-1343], sequence-number,, INFO, system-name, label,
is between high and low boundaries(High=high-value, Low=low-value).
Current value is value unit.
timestamp, [FW-1344], sequence-number,, INFO, system-name, label, value
has changed(High=high-value, Low=low-value). Current value is value unit.