HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

196 Messages
Severity
INFO
FW-1349
Message
Probable cause
The number of invalid signatures fell below the low boundary.
Invalid-signature violations indicate that a packet with an invalid signature was received from the primary
fabric configuration server (FCS).
When the primary FCS downloads a new configuration to the other switches in the fabric, the packet is
signed using the private key of the primary FCS. The receiving switch has to verify this signature with the
public key of the primary FCS switch. If verification fails, the receiving switch rejects the packet. This
counter keeps track of the number of packets received with invalid signatures.
Recommended action
No action is required.
Severity
INFO
FW-1350
Message
Probable cause
The number of invalid signatures rose above the high boundary.
Invalid-signature violations indicate that a packet with an invalid signature was received from the primary
fabric configuration server (FCS).
When the primary FCS downloads a new configuration to the other switches in the fabric, the packet is
signed using the private key of the primary FCS. The receiving switch has to verify this signature with the
public key of the primary FCS switch. If verification fails, the receiving switch rejects the packet. This
counter keeps track of the number of packets received with invalid signatures.
Recommended action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
timestamp, [FW-1349], sequence-number,, INFO, system-name, label, is below
low boundary(High=high-value, Low=low-value). Current value is value unit.
timestamp, [FW-1350], sequence-number,, WARNING, system-name, label, is
above high boundary(High=high-value, Low=low-value). Current value is
value unit.