HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

198 Messages
Severity
INFO
FW-1353
Message
Probable cause
The number of invalid certificates fell below the low boundary. A packet with an invalid certificate was
received from the primary fabric configuration server (FCS).
Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its
certificate to all the switches in the fabric. The receiving switch has to verify that the sender is the primary
FCS switch and its certificate is signed by the Root certificate authority (CA) recognized by the receiving
switch. This counter keeps track of the number of packets received with invalid certificates.
Recommended action
No action is required.
Severity
INFO
FW-1354
Message
Probable cause
The number of invalid certificates rose above the high boundary. A packet with an invalid certificate was
received from the primary fabric configuration server (FCS).
Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its
certificate to all the switches in the fabric. The receiving switch has to verify that the sender is the primary
FCS switch and its certificate is signed by the Root certificate authority (CA) recognized by the receiving
switch. This counter keeps track of the number of packets received with invalid certificates.
Recommended action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
WARNING
timestamp, [FW-1353], sequence-number,, INFO, system-name, label, is below
low boundary(High=high-value, Low=low-value). Current value is value unit.
timestamp, [FW-1354], sequence-number,, WARNING, system-name, label, is
above high boundary(High=high-value, Low=low-value). Current value is
value unit.