HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 201
FW-1359
Message
Probable cause
The number of authentication failures changed from a value outside the acceptable range to a value
within the acceptable range.
Authentication failures can occur for many reasons. The switch on the other side may not support the
protocol, have an invalid certificate, have a certificate that is not properly signed, or send unexpected
packets. The port where authentication fails is segmented. This counter keeps track of the number of
authentication failures.
Recommended action
No action is required.
Severity
INFO
FW-1360
Message
Probable cause
The number of SLAP faulty packets changed. This counter keeps track of the number of unexpected SLAP
packets and SLAP packets with faulty transmission IDs.
Recommended action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
INFO
FW-1361
Message
timestamp, [FW-1359], sequence-number,, INFO, system-name, label, is
between high and low boundaries(High=high-value, Low=low-value). Current
value is value unit.
timestamp, [FW-1360], sequence-number,, INFO, system-name, label, value
has changed(High=high-value, Low=low-value). Current value is value unit.
timestamp, [FW-1361], sequence-number,, INFO, system-name, label, is below
low boundary(High=high-value, Low=low-value). Current value is value unit.