HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

210 Messages
FW-1379
Message
Probable cause
The number of illegal commands changed from a value outside the acceptable range to a value within
the acceptable range.
This counter tracks how many times commands allowed only on the primary fabric configuration server
(FCS) switch have been executed on a non-primary FCS switch. Many commands can be executed only
on the primary FCS switch; one security command can be executed only on a backup FCS switch. The
counter increments every time someone issues one of these commands on a switch where it is not
allowed.
Recommended action
No action is required.
Severity
INFO
FW-1400
Message
Probable cause
The flash usage percentage changed. Flash increases and decreases slightly with normal operation of the
switch. Excessive permanent increases can lead to future problems.
Recommended action
No action is required. Respond to this message as is appropriate for the relevant policy of the end-user
installation.
Severity
INFO
timestamp, [FW-1379], sequence-number,, INFO, system-name, label, is
between high and low boundaries(High=high-value, Low=low-value). Current
value is value unit.
timestamp, [FW-1400], sequence-number,, INFO, system-name, label, value
has changed(High=high-value, Low=low-value). Current value is value unit.