HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

242 Messages
Health monitor error messages
HMON-1001
Message
Probable cause
A problem was encountered reading an essential file containing configuration information from the
nonvolatile storage device. This could be the result of a missing file or a corrupt file system.
Recommended action
1. Run the firmwareDownload command to reinstall the firmware to your switch.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
CRITICAL
Hypertext transfer protocol error messages
HTTP-1001
Message
Probable cause
The PID format has been changed by the administrator.
Recommended action
No action is required. For more information on PID format, refer to the HP StorageWorks Fabric OS 4.x
procedures user guide.
Severity
INFO
timestamp, [HMON-1001], sequence-number,, CRITICAL, system-name,
failure-description
timestamp, [HTTP-1001], sequence-number,, INFO, system-name, Switch
PIDformat has changed to current-PID-format.