HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

300 Messages
Severity
ERROR
SEC-1071
Message
Probable cause
A corruption occurred during the distribution of the security database.
This can occur only when the primary FCS is distributing the security database to the other switches in the
fabric and local validation finds that an error occurred in the security database. This is a rare occurrence.
Recommended action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
Severity
ERROR
SEC-1072
Message
Probable cause
The specific policy type is empty. The security database is corrupted for unknown reasons.
Recommended action
Run supportFtp as needed to set up automatic FTP transfers and then run the supportSave command
and contact your switch service provider.
Severity
ERROR
timestamp, [SEC-1071], sequence-number,, ERROR, system-name, No new data
to apply.
timestamp, [SEC-1072], sequence-number,, ERROR, system-name, policy-type
Policy List is Empty!