HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 313
Severity
ERROR
SEC-1104
Message
Probable cause
The switch failed to get either the primary certificate or a primary public key.
Recommended action
1. Verify that the primary switch has a valid certificate installed and retry the operation.
2. If a valid certificate is not installed, install a certificate by following the procedure specified in the HP
StorageWorks Secure Fabric OS user guide.
Severity
ERROR
SEC-1105
Message
Probable cause
The switch failed to disable security in the fabric.
This can happen if the switch cannot get the required resources to complete the command and sending to
a remote domain fails or the remote domain returns an error.
Recommended action
Run the secFabricShow to verify that all switches in the fabric are in the ready state. Retry the
command when all switches are READY.
Severity
ERROR
timestamp, [SEC-1104], sequence-number,, ERROR, system-name, Fail to get
primary Certificate-or-public-key.
timestamp, [SEC-1105], sequence-number,, ERROR, system-name, Fail to
disable secure mode on all switches.