HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

314 Messages
SEC-1106
Message
Probable cause
Some PKI objects on the switch are not in a valid state; a signature operation failed.
Recommended action
1. Run the pkiShow command and verify that all PKI objects exist on the switch.
2. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the HP
StorageWorks Secure Fabric OS user guide.
Severity
ERROR
SEC-1107
Message
Probable cause
A corruption occurred during the distribution of the security database.
This can occur only when the primary FCS is distributing the security database to the other switches in the
fabric and local validation finds that an error occurred in the security database. This is a rare occurrence.
Recommended action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
Severity
INFO
SEC-1108
Message
timestamp, [SEC-1106], sequence-number,, ERROR, system-name, Failed to
sign message data.
timestamp, [SEC-1107], sequence-number,, INFO, system-name, Stamp is 0.
timestamp, [SEC-1108], sequence-number,, ERROR, system-name, Fail to reset
stamp on all switches.