HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 319
Recommended action
Run the secFabricShow command to verify that all switches in fabric are in the ready state. When all
switches are in the ready state, retry the operation.
Severity
INFO
SEC-1123
Message
Probable cause
The security database was successfully downloaded from the primary FCS.
Recommended action
No action is required.
Severity
INFO
SEC-1124
Message
Probable cause
An attempt was made to disable secure mode in a non-secure fabric.
Recommended action
No action is required.
Severity
INFO
timestamp, [SEC-1123], sequence-number,, INFO, system-name, Security
database downloaded by Primary FCS.
timestamp, [SEC-1124], sequence-number,, INFO, system-name, Secure Mode is
off.