HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

330 Messages
SEC-1170
Message
Probable cause
A corruption occurred during the distribution of the security database. This can occur only when the
primary FCS is distributing the security database to the other switches in the fabric and local validation
finds that an error occurred in the security database. This is a rare occurrence.
Recommended action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
Severity
INFO
SEC-1171
Message
Probable cause
The switch is segmented, and secure mode is disabled on the switch because no license or no PKI objects
are present.
Recommended action
1. Run the pkiShow command to check whether all PKI objects exist. If they do not exit, run the
pkiCreate command to create them for the switch.
2. Run the licenseAdd command to install the required license key. Refer to your switch supplier to
obtain a license if you do not have one.
Severity
ERROR
timestamp, [SEC-1170], sequence-number,, INFO, system-name, This command
must be executed on the Primary FCS switch, the first reachable switch in
the FCS list.
timestamp, [SEC-1171], sequence-number,, ERROR, system-name, Disabled
secure mode due to invalid security object.