HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

334 Messages
Severity
INFO
SEC-1183
Message
Probable cause
A security database conversion failed because of an invalid value.
Recommended action
1. Retry the command with a valid value.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
SEC-1184
Message
Probable cause
The specified action was applied to the specified RADIUS server configuration. The possible actions are
ADD, REMOVE, CHANGE, and MOVE.
Recommended action
No action is required.
Severity
INFO
SEC-1185
Message
timestamp, [SEC-1183], sequence-number,, ERROR, system-name, Policy to
binary conversion error: Port port-number is out range.
timestamp, [SEC-1184], sequence-number,, INFO, system-name, Radius config
change, action action, server ID server.
timestamp, [SEC-1185], sequence-number,, INFO, system-name, action switch
DB.