HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 335
Probable cause
The switch database was enabled or disabled as the secondary AAA when RADUIS is the primary AAA
mechanism.
Recommended action
No action is required.
Severity
INFO
SEC-1186
Message
Probable cause
The RADIUS configuration was enabled or disabled as the primary AAA mechanism.
Recommended action
No action is required.
Severity
INFO
SEC-1187
Message
Probable cause
An SCC security violation was reported. The specified unauthorized switch attempted to join the secure
fabric.
Recommended action
1. Check the switch connection control policy (the SCC policy specifies the WWNs of switches allowed
in the fabric) to verify which switches are allowed in the fabric.
2. If the switch is allowed in the fabric but is not included in the SCC policy, add the switch to the policy.
3. If the switch is not allowed access to the fabric, the message is a valid violation message and an
unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your
enterprise security policy.
timestamp, [SEC-1186], sequence-number,, INFO, system-name, action Radius
Configuration.
timestamp, [SEC-1187], sequence-number,, INFO, system-name, Security
violation: Unauthorized switch switch-wwn tries to join secure fabric.