HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

348 Messages
SEC-3001
Message
Probable cause
The security mode of the fabric was either enabled or disabled.
Recommended action
1. Verify that the security event was planned. If the security event was planned, no action is required.
2. If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity
INFO
SEC-3002
Message
Probable cause
The specified security event occurred. The event can be:
• An FCS failover.
• A security policy being activated
• A security policy being saved
• A security policy being aborted
• A non-FCS password being changed
• A temporary password being set or reset
Recommended action
1. Verify that the security event was planned. If the security event was planned, no action is required.
2. If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity
INFO
timestamp, [SEC-3001], sequence-number, AUDIT, INFO, system-name, User:
user-name, role: user-role, Event: event-name, status: event-status, Info:
security mode state-change:-enabled-or-disabled.
timestamp, [SEC-3002], sequence-number, AUDIT, INFO, system-name, User:
user-name, role: user-role, Event: event-name, status: event-status, Info:
NONE