HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 363
Firmwaredownload failed due to Standby CP
timeout.
0x50
Unable to check firmware version due to
Standby CP timeout.
0x51
Firmwaredownload failed due to Standby CP
timeout.
0x52
Firmwaredownload failed due to Standby CP
timeout.
0x53
Standby CP failed to reboot and was not
responding.
0x54
Firmwarecommit failed due to Standby CP
timeout.
0x55
Unable to check firmware version due to
Standby CP timeout.
0x56
Unable to restore the original firmware due
to Standby CP timeout.
0x57
Standby CP failed to reboot and was not
responding.
0x58
Unable to check firmware version due to
Standby CP timeout.
0x59
Sanity check failed because firmwareDownload
is already in progress.
0x60
Sanity check failed because firmwareDownload
is already in progress.
0x61
NOT USED 0x62
System Error. 0x63
Active CP forced failover succeeded. Now
this CP becomes Active.
0x64
Standby CP booted up. 0x65
Standby CP failed to reboot. 0x66
Standby rebooted successfully. 0x67
Standby failed to reboot. 0x68
Firmwarecommit has started to restore the
secondary partition.
0x69
Table 6 Upgrade messages and code values (continued)
Upgrade message Code