HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

382 Messages
Recommended action
No action is required.
Severity
INFO
UCST-1007
Message
Probable cause
The switch detected an inconsistency in the routing database between the routing protocol and the
hardware configuration. The first port number displayed is what the hardware has configured and the
second port number displayed is what the protocol is using.
Recommended action
1. Run the switchDisable command and then the switchEnable command to reset the routing
database.
2. Run the uRouteShow command to display the new routing tables.
Severity
CRITICAL
UPATH error messages
UPTH-1001
Message
Probable cause
The specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate
list (domain ID list).
Recommended action
No action is required. This ends the current SPF computation.
Severity
WARNING
timestamp, [UCST-1007], sequence-number,, CRITICAL, system-name,
Inconsistent route detected: Port = port-number, should be port-number
timestamp, [UPTH-1001], sequence-number,, WARNING, system-name, No minimum
cost path in candidate list